Features
·
Selectable Measurement Modes
The three-dimensional tracking
system of the TX-20 Tonometer
features a wide range of
movement, so that the examinee's
pupil can be detected easily.
When in Full Auto mode, the
TX-20 Tonometer is a one touch
operation for IOP measurement
for both eyes. Just press the
start button and the unit
automatically aligns and
measures the intraocular
pressure of both eyes. For added
flexibility, the TX-20 Tonometer
also includes Auto and Manual
measurement modes.
·
Soft Air Puff & Position Safety
Alert
For many patients, the only
thing significant and worrisome
about tonometry is the air puff.
The TX-20 Tonometer employs a
delicate air puff for patient
comfort. When the Safety Alert
is set, the TX-20 Tonometer
automatically prevents the
optical head from making
physical contact with the
patient.
·
Visual Reliability & Indicators
When a reading cannot be made,
the TX-20 Tonometer display will
show a snapshot of the
examinee's eye along with the
measurement error. The operator
will know immediately whether it
was an eyelid, eyelash or the
eye being out of position that
caused the error. The operator
will then be informed on the
next action to take such as
adjusting the chin rest or
limiter.
·
External Fixation
The external fixation is
effective for patients with
central vision defects and can
be activated using the menus on
the LCD screen.
·
Compact and Lightweight
Made for comfort for both the
patient and the operator, the
TX-20 Tonometer maximizes a
small work area with its compact
design. At approximately 33
pounds, it comfortably fits on
an instrument table with a Canon
Non-Mydriatic Retinal Camera
(each sold separately.) Keeping
the Canon machines next to one
another can help to expedite the
exam process.
·
Multifunctional Color LCD
Monitor
The 5.7 inch color LCD monitor
tilts 40° making the TX-20
Tonometer easy to use whether
the operator is sitting or
standing. The clear LCD display
also includes multi-functional
screen buttons allowing the
operator to switch menus as
needed.
·
Motorized Omni-Directional
Joystick
Aligning patients is made easier
using the motorized
Omni-directional joystick with a
fine focus dial. All positioning
may be performed with one hand
allowing the other hand to work
with the patient, if needed. The
top of the joystick button
includes the start button, which
can immediately be pressed once
the patient is properly
positioned.
·
Input & Output Modes
The TX-20 Tonometer provides
data output using RS-232C and
LAN connections, and data input
using USB connections.
·
Printouts & Fast Built-In
Printer
Internal memory provides storage
of up to 10 measurements for
each eye, listing in the order
they were taken, or by
reliability. A printout can be
setup to automatically print.
The front loaded built-in
printer includes an auto cutter,
making it simple to remove the
print-out. New paper rolls (sold
separately) can easily be
inserted through the feeder.
|